Product Details

Product introduction of inspection robot

1. Product features

1. 1. Security patrol robot High degree of automation: the circuit can be designed by the computer or the induction magnetic strip of the magnetic air sensor can guide the passage and automatically charge;

1. 2. Security patrol robot Stable operation, stable parking, no vibration and noise;

1. 3. Security patrol robot Improve the corporate image: AGV has a futuristic appearance, beautiful appearance and high observability;

1. 4. Integrated technology of sliding contact power supply and transmission

The repeated positioning accuracy of the security patrol robot is ± 2mm, and the operation is smooth without jamming. 24 hours continuous operation without charging waiting.

1. 5. Security patrol robot has a high work efficiency: no manual management is needed to improve the efficiency of the enterprise;

1. 6. You can choose whether to configure the latent AGV or not in the inspection robot.

2. Application scenarios

As a branch of dangerous operation robot, security patrol robot is mainly used in automatic chemical plant, mine and other places with certain danger.

3. Parameter Table

The above parameters are for reference only. Our product technology is constantly updated and upgraded. At the same time, we also accept the customization and development of customers.

4. Factory and qualification

5. Instructions and precautions

Precautions

1. Electric shock hazard, this equipment must be connected with the power supply under the condition of protective grounding.

2. The security patrol robotsis limited to driving on flat ground, please keep away from the steps.

3. When cleaning and maintaining the equipment, please disconnect the power supply first.

4. It is strictly forbidden for non-professionals to dismantle the machine

5. When using, do not cover the lens with cloth or other covers to prevent poor heat dissipation of the machine.

Instructions and precaution (precautions)

1. Warm water or neutral detergent should be used for cleaning. Do not use gasoline, benzene or other chemical reagents. Wipe or air dry after cleaning.

2. Check whether the front and rear wheel parts are normal or whether there is abnormal sound every week

3. Whether the stability of chassis frame is normal every week

4. Check whether the wheel roller can rotate normally every month

5. Check whether the MAG sensor of AGV car is sensitive and the position is correct every month

6. Check whether the fastening screws are loosing every month.

1. Intelligent Inspection Technology

The system ensures a comprehensive inspection task once a day, and automatically adjusts other inspection tasks according to the inspection results, and automatically adjusts the inspection frequency of the equipment. For example, if the reading value of a meter changes greatly, the system will automatically increase the monitoring times of the meter, while for a long-term unchanged meter, it will automatically reduce the monitoring times. For the equipment with abnormal working state, the system automatically increases the inspection frequency and effectively improves the inspection efficiency of the system.

2. Automatic warning function, SMS alarm

In the process of system cruise, if the temperature of the target equipment is found to be abnormal and the automatic alarm is given, the alarm information includes text information and sound information, which prompts the operator to give specific alarm position information, so as to track the fault point, confirm the alarm situation and eliminate the fault. The system can be set to send the working status of equipment in the power distribution room and switch room to the mobile phones of operation and maintenance personnel by SMS, so as to improve the effectiveness and real-time of system alarm.

3. Anti-false alarm recognition function

All temperature measurements are based on effective equipment identification. According to the patrol strategy, only the marked equipment can be measured, and the external interference heat source can be eliminated automatically, which effectively prevents the generation of false alarm.

4. Automatic report generation

The system software can automatically generate the equipment working temperature analysis report or comprehensive report of a single infrared image. The system can automatically record the temperature value of each temperature measurement and generate a temperature report to reflect the temperature change of the equipment in a certain period of time.

http://www.roboct-global.com/